Reference Guide

Omreport Chassis Bios Or Omreport Mainsystem Bios
Use the omreport chassis bios or omreport mainsystem bios command to view the current BIOS
information. Type:
omreport chassis bios
or
omreport mainsystem bios
Server Administrator displays the summary of the BIOS information for the system.
Omreport Chassis Biossetup Or Omreport Mainsystem Biossetup
Use the omreport chassis biossetup or omreport mainsystem biossetup command to view BIOS setup
parameters that are normally available only during system boot. Type:
omreport chassis biossetup
or
omreport mainsystem biossetup
NOTE: To maintain consistency across the commands, the output format of this command has
changed. Change the user scripts as applicable.
To view the BIOS Setup parameters in short form, type:
omreport chassis biossetup display=shortnames
To list the device boot order, type omreport chassis biossetup and search the list under BIOS
Boot Settings
or UEFI Boot Settings depending on the BIOS boot setting.
NOTE: On Linux systems, user or user groups upgraded to administrator or administrator groups
cannot view the boot order sequence.
BIOS Setup Groups
The following table lists the available groups of the BIOS setup parameters on PowerEdge 13G systems.
NOTE: Based on the hardware configuration, the attributes may vary in a specific group.
Table 5. BIOS Setup Groups
Group Description
BIOS Option Settings Controls the BIOS start settings when bootmode is set to bios.
Boot Settings Controls the system boot settings when bootmode is set to bios.
Embedded Server
Management
Sets up the Embedded Server Management options.
Integrated Devices Controls the devices integrated on the system board.
Memory Settings Controls the system memory settings.
Miscellaneous Settings Controls some miscellaneous system settings.
26