Reference Guide

Omconfig Add PCIe SSD Device To Cachepool
Description Removes the specified PCIe SSD device from the cache pool.
Syntax
omconfig storage pciessd action=removefromcachepool
subsystem=id pciedevice=<PDISKID>, where id is the subsystem ID and
<PDISKID> variable specifies the physical disk. To obtain these values, type
omreport storage controller to display the controller IDs and then type
omreport storage cachecade controller=ID to display the IDs for the
cachecades of the controller.
Example to Remove the specified PCIe SSD device from the cachepool.
Example
omconfig storage pciessd action=removefromcachepool
subsystem=2 pciedevice=0:2:0 force=yes
Omconfig Reactivate PCIe SSD Device
Description Reactivates the specified PCIe SSD device that was part of the cache pool.
Syntax
omconfig storage pciessd action=reactivate subsystem=id
pciedevice=<PDISKID>, where id is the subsystem ID and <PDISKID> variable
specifies the physical disk. To obtain these values, type omreport storage
controller to display the controller IDs and then type omreport storage
cachecade controller=ID to display the IDs for the cachecades of the controller.
Example to Reactivate the specified PCIe SSD device.
Example
omconfig storage pciessd action=reactivate subsystem=2
pciedevice=0:2:0 force=yes
Omconfig Fluid Cache Commands
The following sections provide the omconfig command syntax required to execute fluid cache tasks.
Table 117. Omconfig Fluid Cache Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
fluidcache
action=applylicense licensefile=<filename>
action=connect
178