User's Manual

To exit without starting or stopping the Patrol Read, click Go Back to Previous Page.
Related Links
Setting The Patrol Read Mode
Locate Start Stop Patrol Read In Storage Management
1. In the Server Administrator window, under the system tree, expand Storage to display the controller
objects.
2. Select a controller object.
3. Click Information/Configuration on the controller Properties page.
4. Select Start Patrol Read or Stop Patrol Read from the Available Tasks.
5. Click Execute.
You can also locate this task from the Change Controller Properties drop-down menu.
Related Links
Changing The Controller Properties
Changing The Controller Properties
Does my controller support this feature? See Supported Features.
The Change Controller Properties task provides you the option to change multiple controller properties
simultaneously. This task is available only on SAS controllers with firmware version 6.1 and later.
You can change any or all of the following properties using the Change Controller Properties task:
• Rebuild Rate
• BGI Rate
• Check Consistency Rate
• Reconstruct Rate
• Abort check consistency on error
• Revertible Hot Spare
• Loadbalance
• Auto replace member on predictive failure
• Redundant path view
• Persistent hot spare
NOTE: You can also set these properties using the command line interface. For more information,
see the Server Administrator Command-Line Interface User’s Guide.
Related Links
To Rescan A Controller
To Locate Change Controller Properties In Storage Management
1. In the Server Administrator window, under the system tree, select Storage.
2. On the Storage Dashboard page, Change Controller Properties from the Available Tasks drop-
down menu.
3. Click Execute.
88