User's Manual

Property Definition

failed disk when a rebuild is necessary. For more

information on rebuild rate, see Setting The

Rebuild Rate.

Alarm State Displays whether the alarm on the controller is

enabled or disabled.

Cluster Mode Indicates whether the controller is part of a cluster

configuration.

SCSI Initiator ID Displays the SCSI ID of a SCSI controller. The

default value is 7. You can change the default

value in the BIOS. When controllers in a cluster

configuration display duplicate SCSI Initiator IDs,

refer to SCSI documentation.

Storage Management displays Not Applicable on

some controllers when this property is not

available.

Storage Components

For information on attached controllers, see Controllers.