User's Manual

Property Definition
Name Displays the name of the controller. For more
detailed information on a controller, click its name
on the controller name.
Slot ID Displays the slot to which the controller is
attached. Storage Management displays Slot Not
Applicable for controllers for which it is unable to
display the slot ID and Embedded for embedded
controllers.
NOTE: If Slot Not Available is displayed, you
can identify the slot ID by selecting the
System → Main → System Chassis → Slots
object in the tree view and selecting the
Information tab. The Slot ID property on this
tab may display the correct information.
State Displays the state of the controller. Possible values
are:
• Ready — The controller is functioning
normally.
• Degraded — The controller has suffered a
failure of a component and is operating in a
degraded state.
• Failed — The controller has suffered a failure of
one or more components and is no longer
functioning.
Firmware Version Displays the version of the firmware available on
the controller.
Minimum Required Firmware Version Displays the minimum firmware version that is
required by Storage Management. This property is
displayed only if the controller firmware does not
meet the minimum requirement.
Driver Version Displays the version of the drivers installed on the
controller.
Minimum Required Driver Version Displays the minimum driver version that is
required by Storage Management. This property is
displayed only if the controller driver does not
meet the minimum requirement.
Number of Connector Displays the number of connectors available on
the controller. Each connector can be attached to
physical disks or an enclosure. Depending on the
controller type, the connector can be either a SCSI
channel or a SAS port.
Rebuild Rate The rebuild rate is the percentage of the resources
available on the system dedicated to rebuild a
59