User's Manual

Table 9. Physical Device Properties

Properties Description

ID Displays the physical device ID as reported by the omreport

CLI command.

Status Displays the status of the physical device.

Name Displays the name of the physical device.

State Indicates whether the physical device is ready or not.

Device Name Displays the operating system device name for the physical

device.

Bus Protocol Displays the bus protocol used with the physical device.

Part of Cache Pool Indicates whether the physical device is a part of the cache

pool or not.

Remaining Rated Write Endurance

Displays information on the SSD renewal/replacement based

on the amount of write workloads. This field indicates the

total remaining programs or erase-cycles available on the

SSD, based on the cumulative specification of the total

NAND (Negated AND or NOT AND) Flash chips in the SSD.

NOTE: This option is applicable to Micron PCIe SSDs,

Non-Volatile Memory Express (NVMe) PCIe SSDs, and

SAS/SATA SSDs.

Failure Predicted

Displays whether the physical disk has received a Self-

Monitoring Analysis and Reporting Technology (SMART) alert

and is therefore predicted to fail. For more information on

SMART predictive failure analysis, see Monitoring Disk

Reliability On RAID Controllers. For information on replacing

the physical disk, see Replacing A Physical Disk Receiving

SMART Alerts.

You may also want to review the Alert Log to see if the

physical disk has generated alerts pertaining to a SMART

predictive failure. These alerts can assist you in identifying

the cause of the SMART alert. The following alerts may be

generated in response to a SMART alert:

• 2094

• 2106

• 2107

• 2108

• 2109

• 2110

• 2111

For information on Alert Messages, see the Server

Administrator Messages Reference Guide.

Firmware Revision

Displays the firmware version of the physical device.

Driver Version Displays the version number of the driver.

Device Life Status Displays the health status of the physical device.