User's Manual

Properties Description

omreportcommand. For information on

Command Line Interface, see the Server

Administrator Command Line Interface User's

Guide.

NOTE: In CLI commands, the PCIe SSD

subsystem ID is displayed as the controller ID.

Name Displays the name of the subsystem.

State Displays the status of the subsystem. Possible

values are:

• Ready — The subsystem is functioning

normally.

• Degraded — The subsystem has encountered a

failure and is operating in a degraded state.

• Failed — The subsystem has encountered a

failure and is no longer functioning.

Number of Extender Cards Displays the number of extender cards in the

subsystem. Each extender card can be attached to

physical disks or an enclosure. The extender card

must be a PCIe SSD port.

Available Reports Allows you to view the Slot Occupancy report. For

more information, see Available Reports.

PCIe Extender Cards

The PCIe extender card is attached to the backplane of the system and provides PCIe connectivity for up

to four PCIe SSD devices at the front of the chassis.

NOTE: The PCIe extender card does not have any properties or tasks.

Table 4. PCIe Extender Card

Properties Description

Name Displays the name of the extender card.

State Displays the status of the extender card. Possible

values are:

Ready — The extender card is functioning

normally.

Degraded — The extender card has encountered a

failure and is operating in a degraded state.

Failed — The extender card has encountered a

failure and is no longer functioning.