User's Manual

Controller Task
Name
SAS 5/iR SAS 6/iR PERC H200
Import/Recover
Foreign
Configuration
No Yes Yes
Set Patrol Read Mode No No No
Start Patrol Read No No No
Stop Patrol Read No No No
Controller Reports
Patrol Read Report No No No
Check Consistency
Report
No No No
Slot Occupancy
Report
Yes Yes Yes
Physical Disk
Firmware Version
Report
Yes Yes Yes
Battery Tasks Supported On The SAS 5/iR, SAS 6/iR, And H200 Controllers
Table 57. Battery Tasks Supported on the SAS 5/iR, SAS 6/iR, and H200 Controllers
Battery Task Name SAS 5/iR SAS 6/iR PERC H200
Recondition Battery No No No
Start Learn Cycle No No No
Delay Learn Cycle No No No
Connector Tasks Supported On The SAS 5/iR, SAS 6/iR, And H200
Controllers
Table 58. Connector Tasks Supported on the SAS 5/iR, SAS 6/iR, and H200 Controllers
Connector Task Name SAS 5/IR SAS 6/iR PERC H200
Connector Rescan No No No
Physical Disk Tasks Supported On The SAS 5/iR, SAS 6/iR, And H200
Controllers
Table 59. Physical Disk Tasks Supported on the SAS 5/iR, SAS 6/iR, and H200 Controllers
Physical Disk Task
Name
SAS 5/IR SAS 6/iR PERC H200
Blink/Unblink Yes
Task only available when
an enclosure or
Yes Yes
234