User's Manual
21
Supported Features
Different controllers support different features. The tasks displayed by the Storage Management menus
and other features vary depending on whether the controller supports the feature. This chapter lists the
features supported by the controllers. For more information on Controllers, see your hardware
documentation.
Related Links
Supported Features On The PERC 5/ And PERC 6/ Controllers
Supported Features On The PERC Hardware Controllers
Supported Features On The SAS 5iR, SAS 6iR, And PERC H200 Controllers
Supported Features On The PERC S100, PERC S110, And S300 Controllers
Supported Non-RAID Controllers
Enclosure And Backplane Features
Supported Features On The PERC 5/ And PERC 6/
Controllers
This section identifies the controller-supported features and whether an enclosure can be attached to
the PERC 5/E, PERC 5/i, PERC 6/E, PERC 6/I, and PERC 6/I Modular controllers.
• Controller Tasks
• Battery Tasks
• Connector Tasks
• Physical Disk Tasks
• Virtual Disk Tasks
• Virtual Disk Specifications
• Supported RAID Levels
• Read, Write, Cache And Disk Cache Policy
• Enclosure Support
For enclosure-supported tasks, see Enclosure And Backplane Features.
Controller Tasks Supported On The PERC 5/ And PERC 6/ Controllers
Table 38. Controller Tasks Supported on the PERC 5 and PERC 6 Controllers
Controller Task
Name
PERC 5/E PERC 5/I PERC 6/E PERC 6/I PERC 6/I
Modular
Enable Alarm Yes No No NA NA
Disable Alarm Yes No No NA NA
Quiet Alarm Yes No No NA NA
209