User's Manual

RAID Level Virtual Disk State Scenario Result

location. The problem is

resolved.

Recommendations For Clearing Bad Blocks

Storage Management allows you to clear the bad block warnings. To clear bad blocks, the following

procedure is recommended:

1. Perform a backup of the virtual disk with the Verify option selected.

One of the following scenarios may occur:

– Backup operation fails on one or more files. In this case, restore the file from a previous backup.

After restoring the file, proceed to step 2.

– Backup operation completes without error. This indicates that there are no bad blocks on the

written portion of your virtual disk.

If you still receive bad block warnings, the bad blocks are in a non-data area. Proceed to step 2.

2. Run Patrol Read and check the system event log to ensure that no new bad blocks are found.

If bad blocks still exist, proceed to step 3. If not, the condition is cleared without the need for step 3.

3. To clear these bad blocks, execute the Clear Virtual Disk Bad Blocks task.

This Clear Virtual Disk Bad Block feature is applicable to PERC H310 Adapter, PERC H310 Mini

Monolithic, PERC H310 Mini Blades, PERC H700, PERC H710 Adapter, PERC H710 Mini Blades, PERC

H710 Mini Monolithic, PERC H710P Adapter, PERC H710P Mini Blades, PERC H710P Mini Monolithic,

PERC H800, PERC H810 Adapter, and PERC H730P Adapter family of controllers.

Virtual Disk Properties And Tasks

Use the virtual disk properties and tasks window to view information about the virtual disks and execute

virtual disk tasks.

From the Options menu:

Refresh Partitions: Click to refresh the Virtual Disk Partitions data once the partition is created using the

operating system commands for the available virtual disks.

Go to the Create Virtual Disk Wizard: Launches the Create Virtual Disk Wizard.