User's Manual

CAUTION: Instant Encrypt Erase permanently erases all data present on the disk.
Select the Instant Encrypt Erase task to erase an encrypted physical disk. This task is available for:
Unconfigured SED drive
Foreign configured encrypted drives
Unconfigured and foreign SED drive even when an Encryption Key is not present in the controller
Related Links
Managing The Encryption Key
To Locate Instant Encrypt Erase In Storage Management
To locate this task in storage management:
1. In the Server Administrator window, under the system tree, expand Storage to display the controller
objects.
2. Expand a controller object.
3. Expand a connector object.
4. Expand the enclosure or backplane object.
5. Select the Physical Disk object.
6. Select Instant Encrypt Erase from the Tasks drop-down menu of the physical device you want to
clear.
7. Click Execute.
Convert To RAID Capable Disk
This task enables a disk for all RAID operations.
This task is supported on H310 controllers.
Convert To Non-RAID Disk
This task converts a disk to a Non-RAID disk. After converting a disk to non- RAID, the disk is exposed to
the operating system unlike unconfigured good disks and it enables usage of disk in direct pass-through
mode.
This task is supported on H310 controllers.
143