User's Manual

Property Definition
You may also want to review the alert log to see whether the
physical disk or device has generated alerts pertaining to a SMART
predictive failure. These alerts can assist you in identifying the
cause of the SMART alert. The following alerts may be generated in
response to a SMART alert:
• 2094
• 2106
• 2107
• 2108
• 2109
• 2110
• 2111
For information on alert messages, see the Server Administrator
Messages Reference Guide.
Progress Displays the progress of an operation that is being an operation is
that is being performed on the physical disk or device.
Encryption Capable Displays whether the physical disk or device is a Self-Encryption
Disk (SED). The possible values are Yes and No.
Encrypted Displays whether the physical disk or device is encrypted to the
controller. The possible values are Yes and No. For a non-SED the
value is N/A.
Bus Protocol Displays the technology that the physical disk or device is using.
Possible values are:
• SCSI
• SAS
• SATA
Media Displays the media type of the physical disk or device. The possible
values are:
• HDD — Hard Disk Drive. An HDD is a nonvolatile storage device
which stores digitally encoded data on rapidly rotating platters
with magnetic surfaces.
• SSD — Solid-State Drive. An SSD is a data storage device that
uses solid-state memory to store persistent data.
• Unknown — Storage Management is unable to determine the
media type of the physical disk or device.
Remaining Rated Write
Endurance
Displays information on the SSD renewal/replacement based on
the amount of write workloads. This field indicates the total
remaining programs or erase-cycles available on the SSD, based
on the cumulative specification of the total NAND (Negated AND
or NOT AND) Flash chips in the SSD.
136