User's Manual

To Locate Set Asset Data In Storage Management

To locate this task in storage management:

1. In the Server Administrator window, under the system tree, expand Storage to display the controller

objects.

2. Expand a controller object.

3. Expand a connector object.

4. Select the Enclosure object.

5. Click Information/Configuration.

6. Select Set Asset Data from the Enclosure Tasks drop-down menu.

7. Click Execute.

Blinking The LED On The Enclosure

Does my enclosure support this feature? See Supported Features.

Select the Blink task to blink the LED on the enclosure. You may want to use this task to locate an

enclosure. The LEDs on the enclosure may display different colors and blinking patterns. For more

information on what the blink colors and patterns indicate, refer to the enclosure hardware

documentation.

Setting The Temperature Probe Values

Does my enclosure support this feature? See Supported Features.

The temperature probes monitor the temperature of the enclosure. Each temperature probe has a

warning and a failure threshold. The warning threshold indicates that the enclosure is approaching an

unacceptably warm or cool temperature. You can modify the warning threshold.

The failure threshold indicates that the temperature of the enclosure has gone below the minimum

threshold or exceeded the maximum threshold which may cause data loss. You cannot change the

default values for the failure threshold.