User's Manual

Property Definition
different modes, see the enclosure hardware
documentation.
The bus configuration switch when toggled on a 220S or
221S enclosure, the enclosure should be turned off. For
more information, see Changing The Mode On 220S And
221S Enclosures.
Older 200S enclosures with a version 1.8 kernel that only
have one EMM may display Split Bus mode and not Joined
Bus mode. Joined Bus or Clustered modes may display
when applicable in these circumstances.
Firmware Version Displays the version of the enclosure firmware.
NOTE: For systems supporting multiple backplanes, the
firmware version appears as upstream and downstream
versions.
Service Tag Displays the enclosure Service Tag. The enclosure is
identified by a unique Service Tag number. This information
is used to route support calls to the appropriate personnel.
Express Service Code The enclosure is identified by a unique Express Service Code
number. This information is used to route support calls to
the appropriate personnel.
Asset Tag Displays the asset tag information for the enclosure. You
can change this property using the Setting Asset Data task.
Asset Name Displays the name assigned to the enclosure. You can
change this property using the Setting Asset Data task.
Backplane Part Number Displays the part number of the enclosure backplane.
SAS Address Displays the SAS address of the SAS backplane.
Split Bus Part Number Displays the part number of the enclosure split bus module.
A split bus is indicated by a single triangle symbol on the
back of the enclosure.
Enclosure Part Number Displays the part number of the enclosure.
Enclosure Alarm Displays whether the alarm on the enclosure is enabled or
disabled.
Enclosure And Backplane Tasks
To execute a drop-down menu enclosure task:
1. In the Server Administrator window, under the system tree, expand Storage dashboard to display the
controller objects.
2. Expand a controller object.
3. Expand a connector object.
4. Select the Enclosure object.
5. Click Information/Configuration on the storage Properties screen.
6. Select a task from the Enclosure Tasks drop-down menu.
112