SNMP Reference Guide

unknown(1)
The chassis identification control’s state is
unknown..
enabled(2)
The chassis identification control’s state is
disabled (offline, a binary 0 value) or enabled
(online, a binary 1 value).
notReady(4)
The chassis identification control’s state is
not ready.
identifyChassis(
8)
The chassis identification control’s LEDs may
be returned to (normal) 0, or (identify chassis)
1.
identifyChassisA
ndEnable (10)
The chassis identification control’s LEDs may
be returned to normal (a binary 0 value), or
identify chassis and enabled (a binary 1 value).
Table 233. Host Control Capabilities
Variable Name : DellHostControlCapabilities
NOTE: An operator can manually enable these actions using
SNMP.
Data Type: Integer
Possible Data Values Meaning of Data Value
manualRebootCapa
ble(1)
The operator can reboot capable host.
manualPowerOFFCa
pable(2)
The operator can power off capable host.
manualPowerCycle
Capable(4)
The operator can power-cycle capable host.
manualAllExceptO
perating
SystemShutdownCa
pable(7)
The operator can reboot and power off
capable host.
manualOperatingS
ystemShut
downCapable(8)
The operator can shut down the operating-
system–shutdown capable host.
manualFullyCapab
le(15)
The operator can reboot, power on and off
the power-cycle capable host, and shut
down the operating-system–shutdown
capable host.
manualRebootWith
OSShutdow
nCapable(16)
The operator can reboot with operating
system shutdown.
manualRebootWith
outOSShut
downCapable(32)
The operator can reboot without operating
system shutdown.
manualPowerOffWi
thOSShutd
ownCapable(64)
The operator can power off with operating
system shutdown.
78