SNMP Reference Guide

resetCapable(8)
The hard-drive fault LED can be reset.
Table 230. Hard-Drive Fault LED Control Settings
Variable Name : DellHDFaultLEDControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any fault settings
capabilities.
unknown(1)
The hard-drive fault LEDs’ state is unknown.
enabled(2)
The hard-drive fault LEDs’ state is disabled
(offline, a binary 0 value) or enabled (online, a
binary 1 value).
notReady(4)
The hard-drive fault LEDs’ state is not ready.
reset(8)
The hard-drive fault LEDs have been reset.
resetAndEnable(1
0)
The hard-drive fault LEDs have been reset
and enabled.
Table 231. Chassis Identification Control Capabilities
Variable Name : DellChassisIdentifyControlCapabilities
Data Type: Integer
Possible Data Values Meaning of Data Value
none(0)
The LEDs do not have any chassis
identification capabilities.
unknownCapabilit
ies(1)
The chassis identification control’s
capabilities are unknown.
enableCapable(2)
The chassis identification controls can be
disabled (offline, a binary 0 value) or enabled
(online, a binary 1 value).
notReadyCapable(
4)
The chassis identification control’s
capabilities are not ready.
identifyCapable(
8)
The chassis identification control’s LEDs can
be made to identify the chassis.
resetAndEnable(1
0)
The hard-drive fault LEDs have been reset
and enabled.
NOTE: Chassis identification capabilities allow system administrators to set front panel light-
emitting diodes (LEDs) to blink when the chassis has malfunctioning components. When enabled,
the blinking lights help administrators locate the problem chassis.
Table 232. Chassis Identification Control Settings
Variable Name : DellChassisIdentifyControlSettings
Data Type: Integer
Possible Data Values Meaning of Data Value
77