SNMP Reference Guide

ok(3)
The object’s status is OK.
nonCritical(4)
The object’s status is warning, noncritical.
critical(5)
The object’s status is critical (failure).
nonRecoverable(6)
The object’s status is nonrecoverable (dead).
Table 2108. Dell Status Redundancy
Variable Name: DellStatusRedundancy
Data Type: Integer
Possible Data Values Meaning of Data Value
other(1)
The object’s status is not one of the following:
unknown(2)
The object’s redundancy status is unknown.
full(3)
The object is fully redundant.
degraded(4)
The object’s redundancy has been degraded.
lost(5)
The object’s redundancy has been lost.
notRedundant(6)
Redundancy does not apply or it is not redundant.
Table 2109. Dell Status Probe
Variable Name: DellStatusProbe
Data Type: Integer
Possible Data Values Meaning of Data Value
other(1)
The object’s status is not one of the following:
unknown(2)
The status of the object is unknown.
ok(3)
The status of the object is OK.
nonCriticalUpper(4)
The object is at the noncritical upper limit.
CriticalUpper(5)
The object is at the critical upper limit.
nonRecoverableUpper(6)
The object is at the nonrecoverable upper limit.
nonCriticalLower(7)
The object is at the noncritical lower limit.
criticalLower(8)
The object is at the critical lower limit.
nonRecoverableLower(9)
The object is at the nonrecoverable lower limit.
failed(10)
The status of the object is failed.
Dell Date
Variable Name: DellDate
Data Type: DellUnsigned64BitRange Octet String (SIZE(8))
The DellDate definition is required because SNMP V1 does not support 64-bit ranges. The information
sent back by this subagent has the most significant byte of the information as the first byte. For example,
553