SNMP Reference Guide

TrapID Name Description Severity Category Cause Support
ed by
RAC
Platfor
m
exceeded a
threshold
1015 alertDrscSE
L
Warning The
RAC has
detected a
new event in
the System
Event Log
with Severity:
Warning
Major Error RAC detected a new
system event log with
warning severity (detailed
log info is in drsAlert
Message varbind).
All
1016 alertDrscSE
L
Critical The
RAC has
detected a
new event in
the System
Event Log
with Severity:
Critical
Critical Error RAC detected a new
system event log with
critical severity (detailed
log info is in drsAlert
Message varbind).
All
1017 alertDrscSE
L 80
percentFull
The RAC
system event
log is 80% full
Major Status RAC detected system
event log is 80% full.
All
1018 alertDrscSE
L 90
percentFull
The RAC
system event
log is 90% full
Major Status RAC detected system
event log is 90% full.
All
1018 alertDrscSE
L 90
percentFull
The RAC
system event
log is 90% full
Major Status RAC detected system
event log is 90% full.
All
1020 alertDrscSE
L Normal
The RAC has
detected a
new event in
the System
Event Log
with Severity:
Normal
Informatio
n
Error RAC detected a new
system event log with
normal severity (detailed
log info is in drsAlert
Message varbind).
All
PowerEdge M1000e CMC Traps
This section describes the traps that are generated by the SNMP agent of the PowerEdge M1000e CMC.
All of the enterprise-specific traps documented in this section belong to the MIB enterprise identified by
OID 1.3.6.1.4.1.674.10892.2 and are sent with the following trap variables: drsProductChassisName,
drsProductChassisLocation, drsGlobalCurrStatus, drsCASubSystem, drsCASSCurrStatus,
507