SNMP Reference Guide

Access Read-only
Table 1746. Tape Drive Bus Type
Name
tapeDriveBusType
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.6
Description The bus type of the tape drive.
Possible values: 8. SAS
Syntax INTEGER
Access Read-only
Table 1747. Tape Drive SAS Address
Name
tapeDriveSASAddress
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.7
Description The specified SAS address if this is a SAS tape drive.
Syntax DisplayString
Access Read-only
Table 1748. Tape Drive Media Type
Name
tapeDriveMediaType
Object ID 1.3.6.1.4.1.674.10893.1.20.130.17.1.8
Description The Media type of the tape drive.
Possible Values: 4: Tape
Syntax INTEGER
Access Read-only
Logical Devices Group
The Logical Devices Management Information Base (MIB) group provides information about the logical
devices managed by the Dell Storage Management Software and their relationships to each other.This
group and all of its associated tables and objects are not supported on Microsoft Windows Advanced
Server Limited Edition 64-bit operating system (Windows.Net-64) on a Dell PowerEdge 7150. The
following MIB tables define objects and relationships, or connections among the objects, in the Logical
Devices Group:
• Virtual Disk Table — describes available properties for each virtual disk on the managed system.
• Virtual Disk Partition -- describes the available properties for each disk partitions on the managed
system.
• Array Disk Logical Connection Table — describes the connections between array disks, the virtual
disk to which they belong, and their associated logical disk. For each object in the table, its object
number corresponds to an instance number in the appropriate MIB table for that object where all of
the object properties can be found.
450