SNMP Reference Guide

If set to 0 (zero)
There are no logging settings enabled. unknown
Capabilities(1)
Logging capabilities are unknown.
The logging settings are:
enabled(2)
Logging is disabled (0), or enabled (1).
BIOS Setup Control Group
Basic Input/Output System (BIOS) Setup Control Group variables provide information about the functions
that the BIOS performs in your system. This management information base (MIB) group includes variables
for the boot sequence, speakers, diskettes, ports, network interface controllers (NICs), and the Wakeup
on local area network (LAN) feature.
BIOS Setup Control Group Tables
The MIB tables in this group define the BIOS control of devices and controller cards that are typically
present in a system.
• BIOS Setup Control Table
• SCSI Control Table
• Parallel Port Control Table
• Serial Port Control Table
• USB Control Table
• IDE Control Table
• Diskette Control Table
• Network Interface Control Table
The following MIB table in the BIOS Setup Control Group is supported on Dell PowerEdge xx2x (12G)
systems:
• BIOS Setting Table
BIOS Setup Control Group Tables
Table 1006. BIOS Setup Control Table
Name
biosSetUpControlTable
Object ID 1.3.6.1.4.1.674.10892.1.1400.10
Description Defines the set of single devices in a chassis controlled by the BIOS.
Syntax BiosSetUpControlTableEntry
Access Not accessible
Table 1007. BIOS Setup Control Table Entry
Name
biosSetUpControlTableEntry
Object ID 1.3.6.1.4.1.674.10892.1.1400.10.1
Description Defines the BIOS Control Device Table entry.
273