Reference Guide

Tabelle 22. BIOS-Setup-Einstellungen auf PowerEdge G12-Systemen
Gruppe name=Wertpaar 1 attribute= name=Wertpaar 2 setting=
BIOS Boot
Settings (BIOS-
Starteinstellunge
n)
attribute=BootSeq sequence=aliasname1, aliasname2,..... aliasnameN
attribute=HddSeq sequence=aliasname1, aliasname2,..... aliasnameN
Boot Settings
(Starteinstellunge
n)
attribute=bootMode setting=Bios | Uefi
attribute=BootSeqRetry setting=Enabled | Disabled
Integrierte
Serververwaltung
attribute=FrontLcd setting=None | UserDefined | ModelNum |
Advanced
attribute=UserLcdStr setting=<Zeichenkette>
Integrierte Geräte attribute=EmbVideo setting=Enabled | Disabled
attribute=IntegratedNetwork1 setting=Enabled | DisabledOs
attribute=IntegratedNetwork2 setting=Enabled | DisabledOs
attribute=IntegratedRaid setting=Enabled | Disabled
attribute=IntegratedSas setting=Enabled | Disabled
attribute=InternalSdCard setting=on | off
attribute=InternalSdCardRedun
dancy
setting=Mirror | Disabled
attribute=InternalUsb setting=on | off
attribute=InternalUsb1 setting=on | off
attribute=InternalUsb2 setting=on | off
attribute=IoatEngine setting=Enabled | Disabled
attribute=OsWatchdogTimer setting=Enabled | Disabled
attribute=SriovGlobalEnable setting=Enabled | Disabled
attribute=UsbPorts setting=AllOn | OnlyBackPortsOn | AllOff
Speichereinstellu
ngen
attribute=MemOpMode setting=OptimizerMode | SpareMode | MirrorMode
|AdvEccMode | SpareWithAdvEccMode
attribute=MemOpVoltage setting=AutoVolt | Volt15V
ANMERKUNG: Volt15V steht für 1,5 Volt.
attribute=MemTest setting=Enabled | Disabled
attribute=NodeInterleave setting=Enabled | Disabled
84