Reference Guide

name=value pair 1
config=
name=value pair 2 Description
config=serialoverlan enable=true | false
true: Enables serial over LAN for the BMC.
false: Disables serial over LAN for the BMC.
baudrate=9600 | 19200 | 38400
| 57600 | 115200
9600: Sets the volatile and nonvolatile
connection speed to 9600 bits per second.
19200: Sets the volatile and non-volatile
connection speed to 19200 bits per second.
NOTE: Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850,
2800, and 2850 systems.
38400: Sets the volatile and non-volatile
connection speed to 38400 bits per second.
57600: Sets the volatile and non-volatile
connection speed to 57600 bits per second.
NOTE: Baud rates of 19200, and 57600
are supported on PowerEdge 9G systems.
115200: Sets the volatile and non-volatile
connection speed to 115200 bits per second.
NOTE: Baud rate of 115200 is supported
on certain systems that have a DRAC 5
installed.
NOTE: Baud rate of 19200, 57600, and
115200 are supported on 10G systems that
have iDRAC installed.
privilegelevel=administrator |
operator | user
administrator: Sets the maximum privilege
level that are accepted on a serial over LAN
channel, to Administrator.
operator: Sets the maximum privilege level
that are accepted on a serial over LAN channel,
to Operator.
user: Sets the maximum privilege level that are
accepted on a serial over LAN channel, to User.
config=settodefault Takes the default configuration settings.
config=terminalmo
de
deletecontrol=outputdel |
outputbkspspbksp
utputdel: BMC outputs a <del> character when
<bksp> or <del> is received.
outputbkspspbksp: BMC outputs a
<bksp><sp><bksp> character when <bksp> or
<del> is received.
handshakingcontrol=enabled |
disabled
enabled: Directs the BMC to output a
character sequence that indicates when its
97