Reference Guide

name=value pair 1 name=value pair 2 Description
systemdbpm: Sets the mode to
system demand based power
management.
osdbpm: Sets the mode to
operating system demand based
power management.
NOTE: These options are
applicable only when a
custom profile is selected.
memorypowermode=min | 800 |
1067 | 1333 | max
min: Sets the mode to minimum
power utilization.
800 | 1067 | 1333: Set the mode
to 800, 1067, or 1333 MHz.
max: Sets the mode to maximum
performance.
NOTE: These options are
applicable only when a
custom profile is selected.
fanmode=min | max
min: Sets the fanmode to
minimum power utilization.
max: Sets the fanmode to
maximum power utilization.
NOTE: These options are
applicable only when a
custom profile is selected.
NOTE: Reboot the system for the power profiles setup options to take effect.
Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring
Use the omconfig chassis pwrmonitoring or omconfig mainsystem pwrmonitoring command to
configure power consumption information.
The following table displays the valid parameters for the command:
Table 29. Valid Parameters Of Omconfig Chassis Pwrmonitoring Or Omconfig Mainsystem Pwrmonitoring
name=value pair 1 name=value pair 2 Description
index=<n> NA Number of the probe or probe
index (must specify).
config=probe warnthresh=settodefault Sets the minimum and maximum
warning thresholds values to
default.
90