Reference Guide

OpenManage Inventory Collector 6.x.x

OpenManage Tools 6.x.x

Remote Access Controller 4 Data Populator 4.x.x

Remote Access Controller 4 Managed Node 4.6.3

Secure Port Server 1.x.x

Server Administrator Framework 6.x.x

Agent for Remote Access 1.x.x

Storage Management 3.x.x

Sun Java Runtime Environment 1.x.xx

Omconfig Chassis Or Omconfig Mainsystem

Use the omconfig chassis or omconfig mainsystem commands to:

• Set to default or assign specific values for fan, voltage, and temperature probes

• Configure BIOS behavior during system start up

• Clear memory error counts

• Enable or disable power button control features if the system configuration permits

Use the omconfig chassis -? or omconfig mainsystem -? command to view a list of all omconfig chassis

or omconfig mainsystem commands.

Omconfig Chassis Biossetup Or Omconfig Mainsystem Biossetup

Use the omconfig chassis biossetup or omconfig mainsystem biossetup command to configure system

BIOS settings that are normally available only in the BIOS setup boot time settings of the system.

CAUTION: Changing certain BIOS setup options may disable the system or require you to reinstall

the operating system.

NOTE: Reboot the system for the BIOS setup options to take effect.

NOTE: Not all BIOS setup options are available on every system.

NOTE: Due to the limitations of certain operating systems (for example, VMware ESXi), certain

features are not available with this release of OpenManage Server Administrator.

NOTE: When CSIOR (Collect System Inventory on Restart) is disabled, you cannot configure the

BIOS settings using omconfig command.

BIOS Setup Settings On Systems Prior To PowerEdge 12G Systems

The following table displays the name=value pairs that you can use with omconfig chassis biossetup or

omconfig mainsystem biossetup command on systems prior to PowerEdge12G systems.