Reference Guide

Omreport System Commands Or Omreport

Servermodule Commands

Use the omreport system or omreport servermodule commands to view logs, threshold values, cost of

ownership information, and information about how shutdown actions and recovery actions are

configured.

Omreport System Or Omreport Servermodule

Use the omreport system or omreport servermodule command to see a general status of the

components of the system. When you specify a level 3 command, such as omreport system shutdown or

omreport servermodule shutdown, you get detailed information for one system component rather than

the high-level status obtained with omreport system or omreport servermodule. Type:

omreport system

omreport servermodule

If the system has both a main system chassis or main system and at least one direct attached storage

device, Server Administrator may display a summary that resembles the following example:

SEVERITY

: COMPONENT

Ok : Main System Chassis

Critical

: Storage

Commands For Viewing Logs

Use the omreport system or omreport servermodule command to view the following logs: the alert log,

the command log, and the hardware or ESM log.

NOTE: If the Alert log or Command log displays invalid XML data (such as when XML data generated

for the selection is not well-formed), you must clear the log and resolve the issue. To clear the log,

type: omconfig system alertlog action=clear or omconfig system cmdlog

action=clear

. If you need to retain the log information for future reference, save a copy of the

log before clearing. For more information about clearing logs, see Commands For Clearing Logs.

To view the contents of the alert log, type:

omreport system alertlog

omreport servermodule alertlog

To view the contents of the command log, type:

omreport system cmdlog

omreport servermodule cmdlog