Manualshelf

Reference Guide

ManualsBrandsDell ManualsMotherboardsOpenManage Server Administrator Version 7.4
21222324252627282930
Parameter Description
Boot Mode Displays whether the boot mode is configured to BIOS or Unified
Extensible Firmware Interface (UEFI).
Processor C1-E Displays the Processor C1-E status.
CPU Execute Disable Displays whether the Execute Disable (XD) option is enabled or disabled.
Processor C State Control Displays whether the Processor C State Control option is enabled or
disabled.
Processor CMP Displays the number of cores enabled per processor.
User accessible USB Ports Displays whether the user-accessible USB port is enabled or disabled.
CPU Virtualization
Technology
Displays the additional hardware capabilities provided by Virtualization
Technology.
AC Power Recovery Mode Displays the system state when input power is restored after an outage.
Embedded SATA Controller Displays whether the embedded SATA controller is set to ATA mode, RAID
mode, or is disabled.
SATA Port 0 Displays the state of SATA port 0.
SATA Port 1 Displays the state of SATA port 1.
Dual NIC (1/2) Displays whether NIC 1 and NIC 2 with PXE/iSCSI is enabled or disabled.
Dual NIC (3/4) Displays whether NIC 3 and NIC 4 with PXE/iSCSI is enabled or disabled.
NIC 1 Displays whether the first NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 2 Displays whether the second NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 3 Displays whether the third NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
NIC 4 Displays whether the fourth NIC is enabled (with or without PXE/iSCSI) or
disabled during system boot.
Trusted Cryptographic
Module (TCM)
Displays whether TCM is on or off.
Trusted Platform Module
(TPM) Security
Displays whether TPM is off, on with pre-boot measurements, or on
without pre-boot measurements.
Internal USB Port (number) Displays whether the internal USB is enabled or disabled.
NOTE: Server Administrator may not display the USB sequence
number if there is only one USB port on the system.
Operating System
Watchdog Timer
Displays whether the operating system watchdog timer is enabled or
disabled.
HT Assist Displays the status of the probe filter chipset option.
Internal SD Card Displays whether the internal SD card is enabled or disabled.
27