Reference Guide

Omconfig Blink Cachecade
Description Blinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=blink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
cachecade controller=ID to display the IDs for the cachecades of the
controller.
Example to Blinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=blink controller=1
cachecade=4
Omconfig Unblink Cachecade
Description Unblinks the physical disks included in a cachecade.
Syntax
omconfig storage cachecade action=unblink controller=id
cachecade=id, where id is the controller ID and the cachecade ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
cachecade controller=ID to display the IDs for the cachecades of the
controller.
Example to Unblinks the physical disk in cachecade 4 on controller 1
Example
omconfig storage cachecade action=unblink controller=1
cachecade=4
Omconfig Delete Cachecade
Description Deletes a cachecade.
Syntax
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id, where id is the controller ID and the
cachecade ID as reported by the omreport command. To obtain these values,
type omreport storage controller to display the controller IDs and then
type
omreport storage cachecade controller=ID to display the IDs for
the cachecades of the controller.
In some circumstances, you may receive a warning message. You can override
this warning by using the force=yes parameter. In this case, the syntax is as
follows:
omconfig storage cachecade action=deletecachecade
controller=id cachecade=id force=yes
Example to Delete cachecade 4 on controller 1.
194