Reference Guide

Omconfig Connector Commands
The following table displays the omconfig command syntax required to execute connector tasks.
Table 119. omconfig Connector Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
connector
action=rescan controller=id connector=id
Omconfig Rescan Connector
Description Rescans a controller connector. This command rescans all connectors on the
controller and is therefore similar to performing a controller rescan.
NOTE: This command is not supported on SAS controllers.
Syntax
omconfig storage connector action=rescan controller=id
connector=id, where id is the controller ID and the connector ID as reported
by the omreport command. To obtain these values, type omreport storage
controller
to display the controller IDs and then type omreport storage
connector controller=ID to display the IDs for the connectors attached to
the controller.
Example to Rescan connector 2 on controller 1.
Example
omconfig storage connector action=rescan controller=1
connector=2
Omconfig Cachecade Commands
The following table displays the omconfig command syntax required to execute cachecade tasks.
Table 120. omconfig Cachecade Commands
Required Command
Levels (1, 2, 3)
Optional name=value pairs
omconfig storage
cachecade
action=blink controller=id cachecade=id
action=unblink controller=id cachecade=id
action=deletecachecade controller=id cachecade=id [force=yes]
action=resize controller=id cachecade=id pdisk= <PDISKID>
action=rename controller=id cachecade=id name=<string>
193