Reference Guide

Required Command
Levels (1, 2, 3)
Optional name=value pairs
action=resettempprobes controller=id enclosure=<ENCLOSUREID> index=id
action=setalltempprobes controller=id enclosure=<ENCLOSUREID>
minwarn=n maxwarn=n
action=resetalltempprobes controller=id enclosure=<ENCLOSUREID>
minwarn=n maxwarn=n
action=blink controller=id enclosure=<ENCLOSUREID> minwarn=n
maxwarn=n
Omconfig Enable Enclosure Alarm
Description Enables the enclosure alarm
Example to Enable the alarm on the enclosure attached to connector 2 on controller 1.
Example for SCSI,
SATA, and ATA
controllers
omconfig storage enclosure action=enablealarm controller=1
enclosure=2
Example for SAS
controllers
omconfig storage enclosure action=enablealarm controller=1
enclosure=1:2
Omconfig Disable Enclosure Alarm
Table 106. Omconfig Disable Enclosure Alarm
Description Disables the enclosure alarm.
Syntax
omconfig storage enclosure action=disablealarm controller=id
enclosure=<ENCLOSUREID>, where idis the controller ID. The
<ENCLOSUREID> variable specifies the enclosure.
Example to Disables the alarm on enclosure 2 attached to connector 1 on controller 1.
Example for SCSI,
SATA, and ATA
controllers
omconfig storage enclosure action=disablealarm controller=1
enclosure=2
Example for SAS
controllers
omconfig storage enclosure action=disablealarm controller=1
enclosure=1:2
186