Reference Guide

Parameters Type
pdisk=<connector:targetID,connector:targetID,.....
>
Required
[stripesize=<2k b| 4kb | 8kb | 16kb | 32kb | 64kb |
128kb>]
Optional
[cachepolicy=<d | c>] Optional
[readpolicy=<ra | nra | ara | rc | nrc>] Optional
[writepolicy=<wb | wt | wc | nwc | fwb>] Optional
[name=<string>] Optional
[spanlength=<n>] parameter Optional
controller=id parameter
Specify the controller ID as reported by the omreport storage controller command. For
example,controller=2
raid=<c | r0 | r1 | r1c | r5 | r6 | r10 | r50 | r60>
Use the raid=<c | r0 | r1 | r1c | r5 | r6 | r10 | r50 | r60> parameter to specify concatenation or a RAID level
for a virtual disk. Different controllers support different RAID levels. For more information about RAID
levels a controller supports and for general information about RAID levels and concatenation, see the Dell
OpenManage Online Help. The following table displays how to specify the raid=n parameter for each
RAID level and concatenation.
Table 92. Raid Level And Concatenation
RAID Level or Concatenation raid=n Parameter Specification
RAID-0 raid=r0
RAID-1 raid=r1
RAID-5 raid=r5
RAID-6 raid=r6
RAID-10 raid=r10
RAID-50 raid=r50
RAID-60 raid=r60
RAID-1-concatenated raid=r1c
Concatenation raid=c
size=<number | max | min>
The following table displays how to specify the size=<number | max | min>
172