Reference Guide

Omconfig Rename Virtual Disk
Description Renames a virtual disk.
Syntax
omconfig storage vdisk action=rename controller=id vdisk=id
name=<string>, where id is the controller ID and virtual disk ID as reported by
the omreport command and <string> is the new name for the virtual disk.
NOTE: To obtain these values, type omreport storage controller to display
the controller IDs and then type omreport storage vdisk controller=ID to
display the IDs for the virtual disks attached to the controller.
Example to Rename virtual disk 4 on controller 1 to vd4.
Example
omconfig storage vdisk action=rename controller=1 vdisk=4
name=vd4
Omconfig Enable Fluid Cache on Virtual Disk
Description Enables fluid cache for the specified virtual disk.
NOTE: Enabling fluid cache creates a new fluid cache disk. You must use
only the new fluid cache disk for all future data access. Data access to any
of the corresponding virtual disk or caching its partitions may lead to data
corruption.
Syntax
omconfig storage vdisk action=enablefluidcache controller=id
vdisk=id devicename=<string> cachepolicy=<wb|wt>, where id is the
controller ID and virtual disk ID as reported by the omreport command and
<string> is the device name of the virtual disk, wb is writeback, and wt is
writethrough. To obtain the values for controller ID and virtual disk ID, type
omreport storage controller to display the controller IDs and then type
omreport storage vdisk controller=ID to display the IDs for the virtual
disks attached to the controller.
Example to Enable fluid cache on virtual disk 4 on controller 1.
Example
omconfig storage vdisk action=enablefluidcache controller=1
vdisk=4 devicename=/dev/sdb cacachepolicy=wb
Omconfig Disable Fluid Cache on Virtual Disk
Description Disables fluid cache for the specified virtual disk.
Syntax
omconfig storage vdisk action=disablefluidcache controller=id
vdisk=id devicename=<string>, where id is the controller ID and virtual
disk ID as reported by the omreportcommand and <string> is the device name
of the virtual disk. To obtain the values for controller ID and virtual disk ID, type
omreport storage controller to display the controller IDs and then type
omreport storage vdisk controller=ID to display the IDs for the virtual
disks attached to the controller.
165