Reference Guide

Example
omconfig storage pdisk
action=initialize controller=1 pdisk=4
Omconfig Offline Physical Disk
Description
Makes a physical disk offline.
Syntax
omconfig storage pdisk action=offline
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Offline physical disk 3 on connector 0 of controller
1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=offline
controller=1 pdisk=0:2:3
Omconfig Online Physical Disk
Description
Brings an offline physical disk back online.
Syntax
omconfig storage pdisk action=online
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Bring physical disk 3 on connector 0 of controller 1
back online. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:3
Example for SAS controllers
omconfig storage pdisk action=online
controller=1 pdisk=0:2:30
149