Reference Guide

Omconfig Blink Physical Disk
Description
Blinks the light (light emitting diode or LED display)
on one or more physical disks attached to a
controller.
Syntax
omconfig storage pdisk action=blink
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Blink physical disk 0 on connector 0 of controller
1. On a SAS controller, the physical disk resides in
enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=blink
controller=1 pdisk=0:0
Example for SAS controllers
omconfig storage pdisk action=blink
controller=1 pdisk=0:2:0
Omconfig Unblink Physical Disk
Description
Unblinks the light (light emitting diode or LED
display) on one or more physical disks attached to
a controller.
Syntax
omconfig storage pdisk action=unblink
controller=id pdisk=<PDISKID>, where id is
the controller ID. The <PDISKID> variable specifies
the physical disk.
NOTE: To obtain these values, type omreport
storage controller to display the controller IDs
and then type omreport storage pdisk
controller=ID to display the IDs for the
physical disks attached to the controller.
Example to Unblink physical disk 0 on connector 0 of
controller 1. On a SAS controller, the physical disk
resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers
omconfig storage pdisk action=unblink
controller=1 pdisk=0:0
Example for SAS controllers
omconfig storage pdisk action=unblink
controller=1 pdisk=0:2:0
146