Reference Guide

Table 75. Omreport Global Information Commands
Required Command Levels (1,
2, 3)
Optional name=value pairs Use
omreport storage globalinfo
Displays whether smart thermal
shutdown is enabled or disabled.
For more information, see
Omconfig Global Enable Smart
Thermal Shutdown.
Displays the hot spare protection
policy that you have set. For more
information on setting hot spare
protection policy, see the Dell
OpenManage Server Administrator
Storage Management User’s Guide
at dell.com/support/manuals.
Omreport Connector Status
The following table describes the syntax for the omreport Connector commands
Table 76. Omreport Connector Commands
Required Command Levels (1, 2,
3)
Optional name=value pairs Use
omreport storage connector
Displays all connectors present on all
controllers on the system.
NOTE: This command works
only when the controller ID is
specified.
controller=id, where id is the
controller number. For
example: controller=0
Displays the connectors on the
specified controller.
controller=id connector=id,
where id is the connector
number. For example,
connector=0
Displays the specified connector.
NOTE: When the connectors are
connected to the enclosure in
redundant path mode, the Name
of the connector is displayed as
Logical Connector.
Omreport Cachecade Status
The following table describes the syntax for the omreport Cachecade commands
141