Reference Guide

Required Command Levels (1, 2,
3) and name=value pair
Optional name=value pairs Use
number and n is the number of a
temperature probe. For example:
controller=0 enclosure=2
info=temps index=1
Omreport Fan Status
The following table describes the syntax for the omreport Fan commands
Table 70. Omreport Fan Status
Required Command Levels (1, 2,
3) and name=value pair
Optional name=value pairs Use
omreport storage enclosure Displays property information for
all enclosures attached to the
system.
controller=id
enclosure=<ENCLOSUREID>
info=fans where id is the
controller number and
ENCLOSUREID is the enclosure
number. For example:
controller=0 enclosure=2
NOTE: For SCSI controllers,
the ID specified in
enclosure=<ENCLOSUREID>
is the connector number and
for Serial Attached SCSI (SAS)
controllers, ID is the
connectorNumber:Enclosur
eIndex.
Displays the fans for the specified
enclosure.
controller=id
enclosure=<ENCLOSUREID>
info=fans index=n where id is the
controller number and
ENCLOSUREID is the enclosure
number and n is the number of a
fan. For example: controller=0
enclosure=2 info=fans index=1
Displays the specified fan.
Omreport Power Supply Status
The following table describes the syntax for the omreport Power Supply commands
138