Reference Guide

Syntax Description
omreport storage enclosure controller=id to
display the IDs for the enclosures attached to the controller.
pdisk=<PDISKID>
Indicates a particular physical disk by specifying either
connector:targetID or connector:enclosureID:targetID.
To obtain the values for the connector, enclosure, and
physical disk (targetID), type omreport storage
controller to display the controller IDs and then type
omreport storage pdisk controller=id to display the
IDs for the physical disks attached to the controller.
battery=id
Indicates the battery ID as reported by the omreport
command. To obtain this value, type omreport storage
controller to display the controller IDs and then type
omreport storage battery controller=id to display
the ID for the controller battery.
< >
The caret symbols (< >) enclose variable elements that you
must specify.
For example, the name=<string>parameter is specified as
name=VirtualDisk1.
[ ]
The bracket symbols ([ ]) indicate optional elements that you
can choose whether or not to specify.
For example, when creating a virtual disk, the [name=<string>]
parameter indicates that you have the option of specifying the
virtual disk name. If you omit this parameter from the syntax,
then a default name for the virtual disk is chosen for you.
|
The pipe symbol (|) separates two or more options from
which only one is selected.
For example, when creating a virtual disk, the cachepolicy=d |
c indicates that the cache policy is specified as either
cachepolicy=d or cachepolicy=c.
User Privileges For Omreport Storage And Omconfig
Storage
Storage Management requires Administrator privileges to use the omconfig storage command. User and
Power User privileges are sufficient to use the omreport storage command.
133