Reference Guide

Comman
d Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
signauth=<name> Person who signed
or authorized the
service.
Example Command For Adding Outsource Information
To provide a value for an outsource parameter, type a command of the form: omconfig system assetinfo
info=outsource <name=value pair 2> or omconfig servermodule assetinfo info=outsource <name=value
pair 2>. For example, type:
omconfig system assetinfo info=outsource providerfee=75
or
omconfig servermodule assetinfo info=outsource providerfee=75
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command
at the same time, as long as all the parameters for name=value pair 2 belong to the same name=value
pair 1.
For an example, see Example Command For Adding Acquisition Information.
Adding Owner Information
The owner is the party that holds legal property title to the system. The following table displays the valid
parameters for adding owner information.
Table 57. Valid Parameters Of omconfig system assetinfo info=owner Or omconfig servermodule assetinfo
info=owner
Comman
d Level 1
Command
Level 2
Comman
d Level 3
Name=
Value Pair
1
Name= Value Pair 2 Description
omconfig system or
servermodul
e
assetinfo info=owne
r
insuranceco=<company> Name of the insurance
company that insures
the system.
ownername=<business> Business entity that
owns the system.
type=owned | leased |
rented
Whether the user of
the system owns,
leases, or rents the
system.
126