Reference Guide

Command
Level 1
Command
Level 2
Command
Level 3
Name= Value
Pair 1
Name= Value Pair
2
Description
restrictions=<string
>
Activities not covered
by the maintenance
contract.
Example Command For Adding Maintenance Information
To provide a value for a maintenance parameter, type a command of the form: omconfig system
assetinfo info=maintenance <name=value pair 2> or omconfig system assetinfo info=maintenance
<name=value pair 2>.
For example, type:
omconfig system assetinfo info=maintenance startdate=012504
or
omconfig servermodule assetinfo info=maintenance startdate=012504
The following message is displayed:
Asset information set successfully.
You can type more than one omconfig system assetinfo or omconfig servermodule assetinfo command
at the same time, as long as all the parameters for name=value pair 2 belong to the same name=value
pair 1. For an example, see Example Commands For Adding Acquisition Information.
Adding Outsource Information
Outsourcing is the practice of contracting with another business to maintain the system in good working
order. The following table displays the valid parameters for adding outsource information.
Table 56. Valid Parameters Of omconfig system assetinfo info=outsource Or omconfig servermodule
assetinfo info=outsource
Comman
d Level 1
Command
Level 2
Command
Level 3
Name=
Value Pair 1
Name= Value Pair 2 Description
omconfig system or
servermodul
e
assetinfo info=outsour
ce
levels=<n> Levels of service
that the provider
offers.
problemcomponent=<comp
onent>
System
component that
requires
maintenance.
providerfee=<providerfee> Amount of money
charged for
maintenance.
servicefee=<servicefee> Amount of money
charged for
service.
125