Reference Guide

Event Name Description
event=powerwarn Sets action or enables or disables alert generation when a power
device probe detects that the power supply, voltage regulator module,
or DC to DC converter is pending a failure condition.
event=powerabsent Sets action or enables or disables alert generation when a processor
probe detects that the power supply is absent.
event=powerfail Sets action or enables or disables alert generation when a power
device probe detects that the power supply, voltage regulator module,
or DC to DC converter has failed.
event=processorwarn Sets action or enables or disables alert generation when a processor
probe detects that the processor is running at less than peak
performance or speed.
event=processorfail Sets action or enables or disables alert generation when a processor
probe detects that the processor has failed.
event=processorabsent Sets action or enables or disables alert generation when a processor
probe detects that the processor is absent.
event=redundegrad Sets action or enables or disables alert generation when the system
fans and/or power supplies become inoperative, resulting in less than
full redundancy for that component.
event=redunlost Sets action or enables or disables alert generation when the system
fans and/or power supplies become inoperative, resulting in a lost or a
no redundant components working condition for that component.
event=systempowerwarn Sets actions when a power consumption probe detects a warning
value.
event=systempowerfail Sets actions when a power consumption probe detects a failure value.
event=tempwarn Sets action or enables or disables alert generation when a temperature
probe detects that the temperature is approaching the maximum high
or low limits.
event=removableflashmediapre
sent
Sets actions that Server Administrator performs when the system
detects a removable flash media.
event=removableflashmediawa
rn
Sets actions that Server Administrator performs when a removable
flash media warning is displayed.
event=removableflashmediafail Sets actions that Server Administrator performs when a removable
flash media fails.
event=tempfail Sets action or enables or disables alert generation when a temperature
probe detects that the temperature is either too high or low for proper
operation.
event=voltfail Sets action or enables or disables alert generation when a voltage
probe detects that the voltage is too low for proper operation.
event=intdualsdcardcritical Sets actions that Server Administrator performs when an internal dual
SD card critical event occurs.
113