Reference Guide

To enable broadcast messages if a current probe detects a failure event, type:

omconfig system alertaction event=currentfail broadcast=true

omconfig servermodule alertaction event=currentfail broadcast=true

Example Fan Probe Actions

To generate alerts when a fan probe detects a failure value, type:

omconfig system alertaction event=fanfail alert=true

omconfig servermodule alertaction event=fanfail alert=true

Example Chassis Intrusion Actions

To clear all alert actions for chassis intrusion, type:

omconfig system alertaction event=intrusion clearall=true

omconfig servermodule alertaction event=intrusion clearall=true

Commands For Clearing Logs

You can use the omconfig system or omconfig servermodule command to clear the following logs: the

alert log, command log, and hardware or ESM log.

To clear the contents of the alert log, type:

omconfig system alertlog action=clear

omconfig servermodule alertlog action=clear

NOTE: Entering an invalid RAC user name may prevent the command log from displaying. Clearing

the command log resolves this condition.

To clear the contents of the command log, type:

omconfig system cmdlog action=clear

omconfig servermodule cmdlog action=clear

To clear the contents of the ESM log, type:

omconfig system esmlog action=clear

omconfig servermodule esmlog action=clear

NOTE: For more information about alert messages, see the Dell OpenManage Server Administrator

Messages Reference Guide at dell.com/support/manuals.

110