Command Line Interface Guide

name=value pair 1
config=
name=value pair 2 Description
enableserialoverlan=true: Enables serial over
LAN.
enableserialoverlan=false: Disables serial over
LAN.
NOTE: The enableserialoverlan option is
supported only on PowerEdge 9G
systems.
id=number name=text
id=number: ID (in numeric format) of the user
being configured.
name=text: Name of the user.
id=number newpw=text
confirmnewpw=text
id=number: ID (in numeric format) of the user
being configured.
newpw=text: New password of the user.
confirmnewpw=text: Confirm the new
password.
id=number
serialaccesslevel=administrator |
operator | user | none
id=number: ID (in numeric format) of the user
being configured.
serialaccesslevel=administrator: User with an
ID has access privileges of an Administrator for
the serial port channel.
serialaccesslevel=operator: User with an ID
has access privileges of an Operator for the
serial port channel.
serialaccesslevel=user: User with an ID has
access privileges of a User for the serial port
channel.
serialaccesslevel=none: User with an ID does
not have access privileges for the serial port
channel.
id=number
lanaccesslevel=administrator |
operator | user| none
id=number: ID number of the user being
configured.
lanaccesslevel=administrator: User with an ID
has access privileges of an Administrator for
the LAN channel.
lanaccesslevel=operator: User with an ID has
access privileges of an Operator for the LAN
channel.
lanaccesslevel=user: User with an ID has
access privileges of a user for the LAN channel.
lanaccesslevel=none: User with an ID does not
have access privileges for the LAN channel.
id=user id dracusergroup=admin
| poweruser | guest | custom |
none
id=user id: User ID of the user being
configured.
dracusergroup=admin: Enables the
Administrator user privileges.
dracusergroup=poweruser: Enables the Power
User privileges.
dracusergroup=guest: Enables the Guest user
privileges.
97