Command Line Interface Guide

name=value pair 1
config=
name=value pair 2 Description
operator: Sets the maximum privilege level
that are accepted on a serial over LAN channel,
to Operator.
user: Sets the maximum privilege level that are
accepted on a serial over LAN channel, to User.
config=settodefault Takes the default configuration settings.
config=terminalmo
de
deletecontrol=outputdel |
outputbkspspbksp
utputdel: BMC outputs a <del> character when
<bksp> or <del> is received.
outputbkspspbksp: BMC outputs a
<bksp><sp><bksp> character when <bksp> or
<del> is received.
handshakingcontrol=enabled |
disabled
enabled: Directs the BMC to output a
character sequence that indicates when its
input buffer is ready to accept another
command.
disabled: Does not direct the BMC to output a
character sequence that indicates when its
input buffer is ready to accept another
command.
inputlinesequence=cr | null
cr: The console uses <CR> as a new line
sequence.
null: The console uses <NULL> as a new line
sequence.
lineediting=enabled | disabled
enabled: Enables line editing as a line is typed.
disabled: Disables line editing as a line is typed.
newlinesequence=none| crlf |
null | cr | lfcr | lf
none: BMC does not use a termination
sequence.
crlf: BMC uses <CR-LF> as a new line
sequence when the BMC writes a new line to
the console.
null: BMC uses <Null> as a new line sequence
when the BMC writes a new line to the
console.
cr: BMC uses <CR> as a new line sequence
when the BMC writes a new line to the
console.
lfcr: BMC uses <LF-CR> as a new line
sequence when the BMC writes a new line to
the console.
lf: BMC uses <LF> as a new line sequence
when the BMC writes a new line to the
console.
config=user id=number enable=true | false
id=number: ID (in numeric format) of the user
being configured.
enable=true: Enables the user.
enable=false: Disables the user.
id=number
enableserialoverlan=true | false
id=number: ID (in numeric format) of the user
being configured.
96