Command Line Interface Guide

name=value pair 1 name=value
pair 2
Description
powerbutton=enable |
disable
NA
• true: Enables the Power button on the system.
• false: Disables the Power button on the system.
config=sysname NA Sets the name of the system.
config=syspower NA Sets the system power information.
config=servicetag NA Sets the system service tag information.
config=remoteaccessip
v4
NA Sets the remote access IPv4 information.
config=remoteaccessip
v6
NA Sets the remote access IPv6 information.
config=remoteaccessm
ac
NA Sets the remote access MAC address.
config=ipv4idrac Sets IPv4 DRAC information.
config=ipv6idrac Sets IPv6 DRAC information.
config=macidrac NA Sets the DRAC’s MAC address.
config=ambienttemp NA Sets the system temperature in centigrade.
security=modify NA Allows you to modify the LCD text.
security=view NA Provides read-only access to the LCD text.
security=disabled NA Provides limited access to the LCD text.
remoteindication=true NA LCD flashes when the system detects an active remote
session.
NOTE: The options ipv4idrac, ipv6idrac, and macidrac are deprecated.
Omconfig Chassis Info Or Omconfig Mainsystem Info
Use the omconfig chassis info or omconfig mainsystem info command to enter an asset tag name and a
chassis name for the system. For a blade systems, enter asset tag names for modular components as well.
The following table displays the valid parameters for the command:
Table 25. Valid Parameters Of Omconfig Chassis Info Or Omconfig Mainsystem Info
name=value pair Description
index=<n> Number of the chassis whose asset tag or name you are setting.
tag=<text> Asset tag in the form of alphanumeric text. Letters or numbers should not exceed
10 characters.
name=<text> Name of the chassis.
In the following example, the asset tag for the main system chassis is being set to buildsys:
omconfig chassis info index=0 tag=buildsys
85