Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• com1bmc: Maps serial port 1
to COM port 1 bmc.
NOTE: This command is
applicable only on selected
x8xx systems.
attribute=serialport2 setting=off | auto | com2 | com4
• off: Disables serial port 2.
• auto: Maps serial port 2 to a
COM port.
• com2: Maps serial port 2 to
COM port 2.
• com4: Maps serial port 2 to
COM port 4.
attribute=speaker setting=on | off
• on: Enables the speaker.
• off: Disables the speaker.
attribute=cputurbomode setting=enabled | disabled
CPU turbo mode can increase
the CPU frequency when the
system is operating below the
thermal, power, or current limits.
• enabled: Enables CPU Turbo
Mode.
• disabled: Disables CPU Turbo
Mode.
attribute=uausb setting=on | backonly | off
• on: Enables the user-
accessible USB port(s).
• backonly: Enables only the
user-accessible USB port(s)
located at the back of the
system.
• off: Disables the user-
accessible USB port(s).
attribute=usb setting=enabled | disabled
• enabled: Enables the USB
port(s).
• disabled: Disables the USB
port(s).
NOTE: Depending on the
system's hardware you can
configure either usb or usbb.
attribute=usbb setting=enabled |
enabledwithbios | disabled
• enabled: Enables the USB
port(s) during system boot,
without BIOS support.
• enabledwithbios: Enables the
USB port(s) during system
boot, with BIOS support.
• disabled: Disables the USB
port(s) during system boot.
76