Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
attribute=primaryscsi setting=on | off force=true
CAUTION: If you modify the
setting for primary scsi,
romb, romba, or rombb, the
system becomes inoperable
until you reinstall the
operating system.
• on: Enables this device.
• off: Disables this device.
• force=true: Verification of
setting change.
attribute=romb setting=raid | off | scsi force=true
• raid: Instructs the BIOS to
detect RAID-on-motherboard
as a RAID device.
• off: Disables RAID-on-
motherboard during system
boot.
• scsi:Instructs the BIOS to
detect the RAID-on-
motherboard device as a SCSI
device.
• force=true: Verification of
setting change.
attribute=romba setting=raid | scsi force=true
• raid: Instructs the BIOS to
detect RAID-on-motherboard
channel A as a RAID device.
• scsi: Instructs the BIOS to
detect the RAID-on-
motherboard device as a SCSI
device.
• force=true: Verification of
setting change.
attribute=rombb setting=raid | scsi force=true
• raid: Instructs the BIOS to
detect RAID-on-motherboard
channel B as a RAID device.
• scsi: Instructs the BIOS to
detect the RAID-on-
motherboard device as a SCSI
device.
• force=true: Verification of
setting change.
attribute=sata setting=off | ata | raid
• off: Disables the SATA
controller.
• ata: Sets the onboard SATA
controller to ATA mode.
• raid: Sets the onboard SATA
controller to RAID mode.
attribute=sataport (0...7) or (a...h) setting=off | auto
• off: Disables the SATA port.
74