Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• 19200: Sets the console
redirection failsafe baud rate
to 19200 bits per second.
• 57600: Sets the console
redirection failsafe baud rate
to 57600 bits per second.
• 115200: Sets the console
redirection failsafe baud rate
to 115200 bits per second.
attribute=htassist setting=enabled | disabled
• enabled: Enables the probe
filter chipset option.
• disabled: Disables the probe
filter chipset option.
NOTE: Certain applications
do not function fully if you
enable or disable this option.
attribute=ide setting=on | off force=true
• on: Enables IDE.
• off: Disables IDE.
• force=true: Verification of
setting change.
attribute=idepridrv setting=off | auto
• off: Disables the device.
• auto: Detects and enables the
device automatically.
attribute=intrusion setting=enabled | disabled
• enabled: Enables the intrusion
check during system boot. If
the system also has bezel
intrusion checking, then the
intrusion option checks for
removal of the bezel of the
system.
• disabled: Disables the
intrusion check during system
boot.
attribute=intusb[1..2]
NOTE: The following option
is deprecated:
attribute=intusb
setting=enabled | disabled
• enabled: Enables the internal
USB port.
• disabled: Disables the internal
USB port.
attribute=mouse setting=on | off
• on: Enables the mouse.
• off: Disables the mouse.
attribute=nic1 setting=enabled |
enabledwithpxe | disabled |
enabledonly | enablednonepxe |
enabledwithiscsi
• enabled: Enables the first NIC
during system boot.
• enabledwithpxe: Enables the
first NIC during system boot
(with PXE on if the system has
PXE).
71