Command Line Interface Guide

name=value pair 1 attribute= name=value pair 2 setting= Description
• disabled: Disables XD support
on system.
attribute=cpucore setting=1 | 2 | 4 | 6 | 8 | 10 | 12 |all
• 1: Enables one core per
processor.
• 2: Enables two cores per
processor.
• 4: Enables four cores per
processor.
• 6: Enables six cores per
processor.
• 8: Enables eight cores per
processor.
• 10: Enables ten cores per
processor.
• 12: Enables twelve cores per
processor.
• all: Enables the maximum
cores per processor.
attribute=dbs setting=enable | disable
• enable: Enables Demand
Based Switching (DBS) on the
system.
• disable: Disables DBS on the
system.
attribute=diskette setting=off | auto | writeprotect
• off: Disables the diskette
drive.
• auto: Auto-enables the
diskette drive.
• writeprotect: The diskette
drive is available in read-only
format only. Makes the
diskette drive read-only.
attribute=dualnic setting=off | on | pxeboth |
nic1pxe |nic2pxe | isciboth |
nic1isci | nic2isci | nic1pxenic2isci
| nic1iscinic2pxe | onpxeboth |
onpxenone | onpxenic1 |
onpxenic2
• off: Disables the Network
Interface Controllers (NICs).
• on: Enables the network
interface (PXE or iSCSI is not
enabled on either of the
NICs).
• pxeboth: Enables PXE on
both NICs.
• nic1pxe: Enables PXE on the
first NIC and none (no PXE or
iSCSI) on the second NIC.
• nic2pxe: Enables none (no
PXE or iSCSI) on first NIC and
PXE on the second NIC.
• isciboth: Enables iSCSI on
both the NICs.
69