Command Line Interface Guide

Comman
d Level 1
Command
Level 2
Command
Level 3
User
Privilege
Required
Use
(DDDC) memory modes, and also specify which
mode to use.
pwrmanagem
ent
P, A Allows you to choose between maximum
power, economy, and optimized performance
of the system.
pwrmonitorin
g
P, A Configures power consumption information
and thresholds.
remoteaccess A Configures remote access information.
temps P, A
Sets warning threshold values to the default or a
specific value.
NOTE: You cannot change threshold values
on ESM3 and PowerEdge x8xx systems.
volts P, A
Sets warning threshold values to the default or a
specific value.
NOTE: You cannot change threshold values
on ESM3 and PowerEdge x8xx systems.
storage For more information, see Using The Storage
Management Service.
Help With The Omconfig Command
The following table lists the usage of omconfig commands.
Table 20. Usage Of Omconfig Commands
Command Usage Description
omconfig -? To display the list of the available commands for omconfig.
omconfig <command
level 2> -?
To display the help for about, chassis, preferences, and system’s level 2
commands.
omconfig chassis -? To display the help for omconfig chassis command.
omconfig system -? To display the help for omconfig system command.
omconfig preferences
-?
To display the available commands for omconfig preferences, such as
cdvformat, which is the custom delimiter format (cdv).
omconfig preferences
cdvformat -?
To display the list of delimiter values for the cdv.
omconfig system
<command level 3> -?
To display the list of the parameters you must use to execute a particular
omconfig system command.
omconfig system
alertaction -?
To display the list of valid parameters for omconfig system alertaction.
64