Command Line Interface Guide

NOTE: To maintain consistency across the commands, the output format of this command has
changed. Change the user scripts as applicable.
Omreport System Recovery Or Omreport Servermodule Recovery
Use the omreport system recovery or omreport servermodule recovery command to see whether there is
an action configured for a hung operating system. You can also view the number of seconds that must
elapse before an operating system is considered hung.
Omreport System Shutdown Or Omreport Servermodule Shutdown
Use the omreport system shutdown or omreport servermodule shutdown command to view any pending
shutdown actions for the system. If properties for shutdown are configured, executing this command
displays these properties.
NOTE: Due to the limitations of certain operating systems (for example, VMware ESXi), certain
features are not available with this release of OpenManage Server Administrator.
Omreport System Summary Or Omreport Servermodule Summary
Use the omreport system summary or omreport servermodule summarycommand to view a
comprehensive summary of software and hardware components currently installed on the system. Type:
omreport system summary
or
omreport servermodule summary
NOTE: If the vFlash or SD card size is less than 1 GB, the size is displayed in MB.
NOTE: If iDRAC is installed, Server Administrator displays the LCC version. If BMC is installed, Server
Administrator displays the USC version.
The output that is displayed in the CLI window depends on the systems management software, operating
system, and hardware components and options installed on the system. The following partial command
results are unique and may not resemble the hardware and software configuration of the system:
System Summary
-----------------
Software Profile
-----------------
Systems Management
Name : Dell OpenManage Systems Management Software (64–
Bit)
Version : x.x.x
Description : Systems Management Software
Contains Apache Tomcat Webserver x.x.x
: Common Storage Module x.x.x
52