Command Line Interface Guide

Disable: None
-----------
Fans Group
----------
Settings
Enable: Informational, Warning, and Critical
Disable: None
-----------
Individual Objects
-----------
System Board Fan1 RPM Settings
Index:0
Enable: Informational, Warning, and Critical
Disable: None
System Board Fan2 RPM Settings
Index:1
Enable: Informational, Warning, and Critical
Disable: None
Omreport System Operatingsystem Or Omreport Servermodule
Operatingsystem
Use the omreport system operatingsystem or omreport servermodule operatingsystem command to
display information about the operating system.
Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Use the omreport system pedestinations or omreport servermodule pedestinations command to view
destinations where alerts are sent for platform events. Depending on the number of destinations
displayed, configure a separate IP address for each destination address. Type:
omreport system pedestinations
or
omreport servermodule pedestinations
The output of the omreport system pedestinations or omreport servermodule pedestinations command
lists each of the valid parameters.
NOTE: To maintain consistency across the commands, the output format of this command has
changed. Change the user scripts as applicable.
Destination Configuration Settings For The Omreport System Pedestinations Or Omreport
Servermodule Pedestinations
The actual number of destinations that you can configure on a system using omreport system
pedestinations or omreport servermodule pedestinations may differ.
The following table displays the available settings.
Table 15. Settings For The Omreport System Pedestinations Or Omreport Servermodule Pedestinations
Output Attributes Description
Destination List
Destination Number:
Destination1
destination 1: Displays the first destination.
Example:
101.102.103.104: IPv4 address of the first destination.
50